Product Description
This flow sensor can be used with any Select Doser.
This is the most frequently used flow sensor. It has a 3/4″ thread and can work with a water flow range of 20 to 1,500 l/hr.
Key Features
- The lowest cost of all the flow sensors that can be linked to a Select doser or Tx.
Technical Specifications
- It has a 3/4″ thread and can work with a water flow range of 20 to 1,500 l/hr.
- An arrow on the side of the sensor indicates the direction of flow.
- It is normally preferable to place the flow sensor upstream of the point of injection of product.
Frequently Asked Questions
Q. Can this flow sensor get blocked?
Small particles are unlikely to block a turbine flow sensor. However, if water is coming from an open water source, you will need filtration for sure.
If the sensor does get blocked, try removing the sensor and flushing with fresh water. Do not use a high pressure water source for cleaning.
Reviews
There are no reviews yet.